Removing The Packaging; Using The Product - nedis AIPU100CWT Kurzanleitung

•
Do not insert any objects into the product.
•
Do not place items on top of it.
•
If servicing is needed, refer to qualified personnel.
•
Do not let the power cable touch hot surfaces.
•
Do not use the power cable to carry the device.
•
Do not unplug the product by pulling on the cable. Always grasp the plug
and pull.

Removing the packaging

7
1. Open A
.
6
2. Take out A
3. Remove the packaging and reïnstall A
7
4. Close A
.
4
Do not place the product within 40 cm of the wall to ensure proper
operation.
4
5. Plug A
in a power outlet.

Using the product

1
1. Press B
to switch on the product.
4
2. Press B
to increase / decrease the fan speed.
3
4
B indicates the selected fan speed.
3. Optionally, choose one of the following:
2
• B to select 'sleep'.
6
• B to select 'anion'.
4
Keep the windows closed while the product is switched on.
Set sleep mode
2
1. Press B
to select sleep mode.
4
In sleep mode, the product operates as quiet as possible.
2
2. Press B or B
Set anion mode
6
1. Press B
to select anion mode.
4
The product releases millions of anions per second.
6
2. Press B or B
.
1
to exit this mode.
1
to exit this mode.
6
.
5