Wirbel RAPID 40 TOUCH Gebrauch Und Wartung Seite 36

50) Button with double function - Aspira-
tor start and Quiet operation
" "
Starting the aspirator
Button operation is enabled by pressing
the button (45) "
Press the button (50) "
will start to function; the symbol "
pears on the display.
To turn off the aspirator, press the button
(50), the turbine will continue to function
for a few seconds in order to aspirate the
liquid on the floor, afterwards it will turn
off automatically. The symbol "
disappear from the display
Quiet operation
" "
Pressing and holding the button (50) "
" for a few seconds with the aspirator
in operation will reduce the speed of the
suction turbine thus significantly reducing
the noise made by the machine; with this
function enabled the display will show the
symbol " ".
Pressing the button (50) "
a few seconds, will disable the function
and the machine will resume its operation
in standard mode; the symbol "" will dis-
appear from the display and the symbol "
" will be displayed instead.
NOTE:
When turning off the aspiration turbine with
"silent operation" mode enabled, the opera-
tion of the turbine will automatically switch
to "standard operation" mode for the entire
shut-off delay time.
".
", the aspirator
" ap-
" will
" again, for
ENGLISH - 8
Professional Cleaning Machines Since 1968
51) Water solenoid valve button "
Button operation is enabled by pressing
the button (45) "
".
By pressing the button (51) "
display will be shown the symbol "
", and the opening of the water valve is
being prepared. The operation thereof is
controlled by the touch sensor (20).
By repeatedly pressing the button (51) "
" the amount of water is increased;
once the maximum amount is reached,
the display will show the symbol "
pressing the button (51) again will deacti-
vate the function.
52) Brush rotation enable button "
Button operation is enabled by pressing
the button (45) "
Pressing the button (52) "
able the rotation of the brush/es; the
display will show the symbol "
operation of the brush/es is controlled by
the touch sensor (20).
To stop brush rotation, press the button
(52) " ".
49) Chemical agent dosing button (op-
tional)
By pressing the button (49) "
play will show the symbol " " activating
the operation of the chemical agent dos-
ing pump.
By repeatedly pressing the button (49) "
" the amount of dosed chemical agent
is increased; once the maximum amount
is reached, the display will show the sym-
bol " " ; pressing the button (49) again
will disable the function.
www.ghibliwirbel.com
"
" and button (52) "
", on the
";
"
".
", will en-
". The
" the dis-