Operation; Troubleshooting - Motorola RMN5065 Bedienungsanleitung

DISCONNECTING MIC FROM
RADIO
1. Turn the locking collar on the radio end
of the Mic cord 1/4 turn counter clock-
wise.
2. Pull cable from accessory interface
connector to release.

OPERATION

Press PTT switch before speaking into Mic.
Position Mic about 1-inch away from mouth
and speak into Mic in a normal voice.

TROUBLESHOOTING

Troubleshooting of Mic is limited to
determining whether the inoperable condition
of a Mic is caused by a faulty Mic Cord or a
faulty Mic Head. To make this determination
and correct the fault, replace the Mic Cord
with the spare first. If replacing the Mic Cord
does not restore operation, then order a
replacement Mic. The Mic Cord and Mic
Head are not repairable items, therefore they
must be replaced when they are determined
to be faulty.
4