Sanyo ICR-1000 Bedienungsanleitung Seite 30

Selecting the action Windows is to take
After connection, the following screen will appear (Windows XP only).
- For Windows ME/2000, this operation is not needed.
The screen shots are of Windows XP.
Adjust your settings to match
your PC's environment.
In this manual, [Take no action]
is selected, [Always do the
selected action] is checked, and
[OK] is clicked. This completes
the connection to the PC.
1) Select
2) Check
3) Click
Note:
Too many files or too large file may take much time to open the PC application.
GB-29
[ENGLISH]