Sanyo ICR-1000 Bedienungsanleitung Seite 13

BEEP: Selecting beep mode
ON: Every time the operation buttons are pressed, a beep sound will
be heard.
OFF: No beep sound
ERASE GUARD: Selecting erase guard mode
OFF: You may erase the data.
ON: You cannot erase the data. ("
12/24 (See Page 8.)
LCD LEVEL: Selecting the LCD display brightness
"LEVEL 1" - "LEVEL 10" can be selected.
VERSION: Showing the current firmware version
" appears on the display.)
[ENGLISH]
GB-12