De Dietrich DME7121 Gebrauchsanleitung Seite 55

The program begins: the turntable
revolves, the oven light comes on.
Three beeps announce the end of a
program.
The beeps are repeated every minute for
ten minutes until you open the door.
During the program:
- You can change the power by using the
selector.
Setting a defrost program:
Proceed in a similar fashion but select the
defrost function
1. Set the time using the + and - keys, e.g.
10 minutes.
2. Press the start key
In the defrost function (150W), a beep
sounds in mid-program and
displayed to tell you to turn the food over to
obtain the best results. Close the door and
press the key to continue defrosting.
During the program:
-You may stop or start the turntable by
pressing .
The symbol flashes in the display with
the word OFF, telling you to stop the
turntable.
Press to re-start the turntable.
The symbol flashes in the display with
ON telling you to re-start the turntable.
-If you open the door before the end of the
.
.
TURN
program, close it and press
program.
-At the end of a program, the fan may continue
to run to ensure proper cooling. It will stop
automatically.
is
14
to resume the