Weighing additional amounts (tare function)
The tare function allows you to reset the displayed weight/volume to 0 again
if you want to add more quantities of pet food and weigh them individually .
♦
Weigh the first amount of pet food as described above .
♦
Press the
is reset and the display
♦
Now add the next amount of pet food .
The weight/volume of the last added amount of pet food is shown on the
display
2
You can repeat the steps described above as often as you like for further quantity
additions until you have reached the maximum permissible total weight/volume
(2000 g/4 .4 lb) .
Cleaning and maintenance
CAUTION – PROPERTY DAMAGE
►
Do not allow any liquids to get into the scales .
This can damage the appliance .
►
Do not use abrasive cleaners or solvents . These can attack the surface of
the appliance .
♦
Wipe the appliance with a damp cloth . For stubborn soiling use a mild
detergent on the cloth . Wipe off any detergent residue using a cloth
moistened with clean water only .
♦
Remove the measuring bowl
warm water with a mild detergent . Rinse the measuring bowl
water so that all detergent residues have been removed . Dry the measuring
bowl
NOTE
Storage
♦
Store the appliance in a clean, dry place away from direct sunlight .
♦
Do not store any objects in the feeding bowl
■
20
│
GB │ IE
/TARE/UNIT button
2
.
.
4
You can also clean the measuring bowl
briefly . The current measured value
1
shows 0 .
from the feeding bowl
4
in the dishwasher .
4
or in the measuring bowl
3
and clean it in
3
with clear
4
.
4
ZFW 1.7 A1