Autophix OM126 Bedienungsanleitung Seite 8

2) To exit to the Main Menu, press the EXIT button.
3.5 Review
This function is used to review the recorded DTC. Select Review in
the Main Menu and press Enter and the screen will display the
interface as shown below:
3.6 Tool /Setup
The scan tool allows you to make the following adjustments and
settings:
1) Select Language: Selects the desired language.
2) Unit of Measure: Set measure to English or Metric.
3) Beep Set: Turns ON/OFF beep.
4) Record: ON/OFF the Record.
5) Feedback.
Review
Review DTC
Delete DTC Date
Delete All DTC Date
Tool Setup
Language
Unit of Measure
Beep
Record
Feedback
7
EN