On-Board Monitor Test - Autophix OM126 Bedienungsanleitung

4.6 O2 sensor test
OBD II regulations set by the SAE require that relevant vehicles
monitor and test the oxygen (O 2) sensors to identify problems
related to fuel efficiency and vehicle emissions. These tests are
not on-demand tests and they are done automatically when
engine operating conditions are within specified limits. These
test results are saved in the on-board computer's memory.
The O2 Sensor Test function allows retrieval and viewing of O2
sensor monitor test results for the most recently performed tests
from the vehicle's on-board computer.
The O2 Sensor Test function is not supported by vehicles which
communicate using a controller area network (CAN). For O2
Sensor Test results of CAN-equipped vehicles, see chapter
"On-Board Mon. Test".
Select O2 Sensor Test in Diagnostic menu and press ENTER and the
Screen will display as shown below:
Press ENTER button, the screen will display as shown below (Data
will be different everytime) :

4.7 On-board monitor test

This function can be utilized to read the results of on-board diagnostic
monitoring . Tests for specific components/systems.
EN
16