Autophix OM126 Bedienungsanleitung Seite 13

Notes:
Before performing this function, make sure to retrieve and record
the trouble codes.
After clearing, you should retrieve trouble codes once more or turn
ignition on and retrieve codes again. If there are still some trouble
codes in the system, please troubleshoot the codes using a factory
diagnosis guide, then clear the codes and recheck.
4.3 I/M Readiness
Select I/M Readiness and press ENTER, the screen will display the
interface as shown below:
I/M readiness is to test Misfire / Fuel system / Comprehensive
component, You can use UP or DOWN button to select and press
ENTER, shown as follow :
N/A means not available on this vehicle, INC means incomplete or not
ready, OK means Completed or Monitor Ok.
12
EN