Quax STRETTO Handbuch Seite 41

STRETTO
54 03 27xxxx
7. Assembling and fi xing the extension
Step 1 : Use the sides A, the back C, the connector B, four wooden dowels 1, eight wood screws 2 and
the hexagonal wrench 4
Push two wooden dowels (1) in the provided openings at the bottom and two at the back of the sides (A).
Push the back (C) over the wooden dowels at the back of the sides. Insert four wood screws (2) into the
holes provided in the back and tighten. Push the connector (B) over the wooden dowels at the bottom of
the sides. Insert four wood screws (2) into the holes provided in the connector and tighten.
Step 2 : Use the parts of step 1, the chest of drawers 54 03 26xxxx and two wood screws 3
Place the extension with its connector on the frontside of the chest of drawers and with the holes in its back
(C) in front of the drillings in the back of the chest of drawers. Push the wood screws (3) through these
holes and tighten.
Luiermeubel met drie laden
Wickelmöbel mit drei Schubladen
Meuble à Langer avec trois tiroirs
Changing Cabinet with 3 drawers
Quax
First dreams
®
First steps
41