Quax STRETTO Handbuch Seite 39

STRETTO
54 03 27xxxx
Step 8 : Use the parts of step
7, the slides 9L and 9P and the
twelve wood screws 8
Place 3 left slides (9L) on the
drillings of the left side (AL)
and tighten with the wood
screws 8. Use the third hole on
the front of the slides. Repeat
on the right side (AP) with the
right slides (9P).
Step 10 : Positioning the drawers
Start with the lowest drawer. Pull out the drawer slides and place the assembled drawer against the stop
at the end of the gliders. Push the drawer over the stop in front of the drawer slides. Repeat these actions
until all drawers are positionned.
Luiermeubel met drie laden
Wickelmöbel mit drei Schubladen
Meuble à Langer avec trois tiroirs
Changing Cabinet with 3 drawers
Step 9 : Use three drawer-
fronts E, twelve connectors
1, three sides FL and FP,
twelve eccentrics 2, three
backs G, twelve wooden
dowels 3, twelve
screws 10, three bottoms H
and fi fteen wood screws 7
Fix 4 connectors (1) in the
drillings of a front (E). In-
sert 4 eccentrics (2) in the
holes on the outside of the
sides (FL and FP). Push 2
wooden dowels (3) in the
holes of a back (G) and the
sides. Place a drawerback
between the sides and fi x it
by means of the bolts (10).
Slide the drawerbottom (H)
into the grooves of the as-
sembled drawer and fi x the
bottom to the drawer by
means of the wood screws
(7). Push the drawerfront
with its connectors into the
openings of the sides and
fasten it with the eccentrics.
Repeat for all remaining
drawers.
Quax
First dreams
®
First steps
wood
39