Maxwell MW-3715 G Die Betriebsanweisung Seite 9

danger that can be caused by its improper
usage.
•
For children safety reasons do not leave poly-
ethylene bags used as a packaging unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
•
Install and remove the attachments only after
the unit has cooled down completely.
•
Never pull the power cord when disconnecting
the unit from the mains, take the power plug
and carefully remove it from the mains socket.
•
Transport the unit in the original package only.
•
Keep the unit out of reach of children and dis-
abled persons.
• After unit transportation or storage at low tem-
perature, keep it for at least three hours at room
temperature before switching on.
•
If there are any malfunctions, unplug the unit
and apply to any authorized service center from
the contact list, given in the warranty book and
on the website www.maxwell-products.ru.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE
ONLY
UNIT PURPOSE
The unit can be used for any types of clothes and
fabrics. If you have any doubts whether you can
use the unit to steam some fabric or clothes follow
manufacturer's recommendations.
If such information is not available, try to steam the
fabric from the backside. When ironing such fabrics
as silk or corduroy, treat the fabric with steam by
holding the sprayer (1) some distance away from
the material.
Use the brush attachment (9) to remove unneces-
sary lint and threads.
BEFORE THE FIRST USE
•
Unpack the unit, remove any stickers that can
prevent unit operation, remove the protective
film from the working surface of the sprayer (1).
Place the unit on a flat stable surface.
Note: After unit transportation or storage at
low temperature, it is necessary to keep the
unit for at least two hours at room temperature
before using it.
• Insert the steam hose (2) into the outlet (3),
matching the ledges on the clamp (4) with the
grooves of the outlet, and turn the clamp clock-
wise.
MW-3715.indd 9
STEAMER OPERATION
•
To operate the steamer, fill the tank (5) with
water.
•
Using the water inlet (6) fill the water tank (5)
with water.
•
Ensure that the water level in the water tank (5)
is not below the minimal mark «MIN» and not
above the maximal mark «MAX».
•
Install the brush attachment (9) (pic.1) or
the garment clamp (10) (pic. 2) on the sprayer
(1).
pic. 1
pic. 2
Attention!
Do not use hot water. To extend the operation
period of the steamer it is recommended to
use distilled and demineralised water. Donot
switch the unit on if it is empty.
•
Connect the unit to the mains.
• Switch the on/off button (8) to the «I» position,
the button illumination will light up.
• Wait for intensive steam release from the spray-
er openings (1). It will take some time (45 sec-
onds).
•
Hold the sprayer (1) by the handle (11); take
the sprayer (1) to the bottom of the clothes
item. Steam will go along the external and
internal surface of the fabric ironing the folds.
Slowly move the sprayer (1) vertically bottom-
upwards. Straighten the fabric using the free
hand.
Note: Do not allow bending of the steam
hose (2).
• After finishing the unit operation switch the on/
off button (8) to the "O" position and unplug
the unit.
•
Let the clothes dry and cool down.
9
ENGLISH
23.09.2015 17:29:21