English
3. If a WEP/WPA key (password) is required, the radio will ask you to input the WEP/WPA
code and display the password entry screen as follows:
Turn SELECT to cycle through the alphanumeric character list, press SELECT to
•
select an appointed character.
Note: WEP/WPA pass codes are case-sensitive.
•
If the wrong character is input while entering your password, select ' ' to delete that
character.
Note:
a.
BKSP
= Backspace.
b. the method of select
BKSP , OK
'0
' , Turn SELECT counter-clockwise and select CANCEL , then continue to turn counter-
clockwise and select OK or BKSP in turn.
c. Selecting CANCEL will return to the previous track.
d. The radio will automatically save the WEP/WPA you've input, so you do not need to re-enter
these codes.
e. After selecting the final character of your password, turn SELECT to OK
confirm.
4. Press the SELECT knob to exit. The setting is OK now!
or CANCEL : while the cursor is pointing to
, press SELECT to
12