Product Set Up; Product Use; Rain Cover - Nuna triv carry cot Bedienungsanleitung

Product Set Up

1
Take the carry cot out. (1)
2
Please ensure the 2 support mounts which under the
soft are securely attached. A "click" sound means the
support mount is attached completely. (2-1)(2-2)
3
To release the support mounts, please see image (3).
4
Pull up the canopy as illustrated while pressing the
buttons on both sides. (4)
5
Check to make sure the handle is secure before placing
the child in the carry cot. (5)-1
Please make sure that the handle is in the correct
position of use before carrying or lifting.
6
Always use the mattress when using the carry cot. (6)(7)
Mattress cover can easily be removed to wash.
7
Assemble the carry cot cover and shade panel as shown
in (8)(9).

Product Use

Canopy
1
Pull the dream drape™ out from under the carry cot
canopy, then secure it to the two sides of carry cot with
magnets. (10)(11)
2
Flip the rear panel of the carry cot canopy upwards for
more ventilation. (12)
9 TRIV carry cot instructions
Carry Cot Attachment on Stroller Frame
1
Attach the post adapters. Place the post adapters on the
seat mounts. A "click" sound means the post adapters
are attached.
2
Place the carry cot directly down until it latches into
place. The carry cot is securely attached with a positive
"click". (13)
Always remove the stroller seat before using the carry
cot.
Please do not fold the stroller when the carry cot is still
attached.
3
The carry cot can be installed rear or forward facing on
the post adapters. (14)
4
The carry cot can be used with TRIV.

Rain Cover

To assemble the carry cot rain cover, place it over the carry
cot, and attach the hook and loop fasteners on the top of rain
cover. (15)
ALWAYS check ventilation when the rain cover is on the
product.
ALWAYS check that the rain cover has been cleaned and
dried before folding.
TRIV carry cot instructions 10