Parts List; Opening The Nuna Travel Cot; To Set Up The Bassinet; To Set Up The Travel Cot - Nuna sena Anweisungen

Parts List

Check that you have all the parts for this product before
using it. The assembly must be performed only by adults.
Tools : No tools required.
· Travel cot
· Mattress
· Storage bag
9 SENA Instructions

Opening the Nuna Travel Cot

Check that you have all the parts for this product before
using it. The assembly must be performed only by adults.
1
- To uncover the SENA travel cot frame (1), undo hook and
loop straps from the mattress and unfold. (2)
2
- Pull the short sides of the SENA travel cot frame
outward. (3)
3
- Reach through bassinet and push down on bottom of
SENA travel cot (4), push down the bottom center hub of
the travel play yard. (5)

To Set Up the Bassinet

1
- Install mattress. (6)
2
- Install mattress, soft side up. The installed bassinet is
shown as (7)

To Set Up the Travel Cot

1
- Remove mattress from the bassinet.
2
- Remove the snaps (8) on the bassinet fabric from the snaps
at the center of each side the SENA travel cot . (9)
3
- Release the clips (10) on the four corners of the SENA
travel cot (11). The clip attached to the long webbing should
loop out of the fabric loop on the SENA travel cot after being
released.
4
- Take off the bassinet. (12)
SENA Instructions 10