Anlapus PoE NVR System Anleitung Seite 3

1.3 Connect the System
① Connect the camera to the NVR using a network ethernet.
② Connect the NVR to the router using a network ethernet . Connect the camera to a power source
(smaller 12V 1A power adapter).
③ Connect the monitor to the NVR via HDMI or VGA port (this product does not include HDMI and
VGA video cables).
④ Plug the Mouse to the USB port at the back panel .
⑤ Connect the NVR to a power source (48V power adapter).
⑥ After the system starting, the display will show the real-time monitoring image of the camera.
3