Station List - Schwaiger DAB 400 Bedienungsanleitung Und Sicherheitshinweise

Station List

The Station List will show all the found DAB stations after scanning.
1. Press and hold the INFO/MENU button, and then press ▲ / ▼ buttons to
select <Station List>. Press SELECT button to confirm.
2. Press ▲ / ▼ buttons to select the station and press SELECT button to listen.
Full Scan
The full scan will search for the entire DAB Band III channels. After the scan has
finished, the first alphanumerically found station will be automatically selected.
1. To activate Full Scan, press and hold INFO/MENU then press ▲ / ▼ buttons
to select <Full scan>. Press the SELECT button to confirm. The display will
show "Scanning..." and a progressing slide bar.
2. All the stations that have been found will be stored automatically. To explore
and listen to the found stations, press ▲ / ▼ buttons and then SELECT to
confirm selection.
Manual Tune
As well as the normal method of scanning, you can also manually tune to a par-
ticular channel / frequency. This can be useful for adjusting your antenna to
achieve the best possible reception and scanning a particular channel to update
the station list.
1. Press and hold INFO/MENU and then press ▲ / ▼ buttons to select <Manual
Tune>. Press SELECT to confirm.
2. Press ▲ / ▼ buttons to go through the DAB channels, which are numbered
from 5A to 13F.
3. After your desired channel number is selected, press the SELECT button to
enter the current multiplex. It will now display the multiplex and you will see
the signal strength.
4. You will not see any new radios stations or hear anything while in manual tune.
To find the newly tuned in stations search through the Station List.
Now playing information (Slideshow)
While a station is playing, the screen shows its name and DLS (Dynamic Label
Segment) information broadcast by the station such as programme name, track
title and contact details.
Press SELECT button to cycle through the following slideshow displays:
1. Station name, slideshow image and scrolling DLS text being broadcast by the
current station.
2. Full screen version of the slideshow image.
3. Station name, slideshow image and DLS text being broadcast by the current station.
» If no slideshow image is available a default DAB thumbnail image is
displayed.
USER GUIDE
25