Manual Channel Search; Save Station; Recalling A Stored Station - Schwaiger DABWORK2 513 Bedienungsanleitung Und Sicherheitshinweise

USER GUIDE
To access the station list of the DAB+ radio stations found, turn the tuner control knob (9) to the
right or to the left while in DAB+ playback mode. Then select the desired station by pressing the tuner
control knob (9) once. The selected station will now be played back.

Manual channel search

This function allows you to manually search for specific DAB+ radio stations by their channel assign-
ment. To do this, proceed as follows.
1. Press the menu button (4) to enter the submenu of the DAB+ radio reception
2. Turn the tuner control knob (9) to the right or left until the item „Manual tune" appears in the
display.
3. Press the tuner control knob (9) once to go to the manual channel search.
4. Turn the tuner control knob (9) to the right or left until you reach the desired channel. Then select
the channel by pressing the tuner control knob (9) once.

Save station

In DAB+ mode, you can store up to 40 radio stations on the preset buttons for fast access. To do this,
follow the steps described below:
• Select a radio station from the station list as described above.
• To store the station, you have found directly in programme presets 1, 2 or 3, press and hold the pre-
set 1 button (11), preset 2 button (10) or preset 3 button (7) for about 1 second. The selected
programme memory location and the text „stored" appear briefly in the display. The radio station
has now been successfully stored on the selected preset button.
• If you want to store a found station on one of the programme memory locations 1 to 40, press and
hold the preset 4+ button (8) for about 1 second. The selection list of presets 1 to 40 appears.
Turn the tuner control knob (9) to the right or left to select the desired preset. Then confirm your
selection by pressing the tuner control knob (9). The selected programme memory location and the
text „stored" appear briefly in the display. The radio station has now been successfully stored in the
selected memory location.

Recalling a stored station

To recall a stored DAB+ station, press the corresponding preset button on the product.
You can play the stations stored in presets 1, 2 and 3 directly by briefly pressing the preset 1 button
(11), preset 2 button (10) or preset 3 button (7) once. The station stored there is then played back.
To call up a station stored in presets 1 to 40, briefly press the preset 4+ button (8) once. This takes
you to the complete station memory list. Now turn the tuner control knob (9) to the right or left to
select the desired station. Then confirm your selection by pressing the tuner control knob (9). The
selected station is then played back.
If you select a programme memory location that is not occupied, the text „Preset empty" appears
briefly in the display and the last radio station played is played.
Remove stations
This function allows you to clear your stored station list of any unavailable radio stations and delete
them.
1. Press the menu button (4) to enter the DAB+ radio reception submenu.
2. Turn the tuner control knob (9) to the right or to the left until the item „Prune" appears in the
display. Select it by pressing the tuner control knob (9) once.
3. Now turn the tuner control knob (9) once to the left to select „Yes" and continue deleting unavail-
able stations. If you select „No", the process is cancelled. Confirm your selection by pressing the tuner
control knob (9).
24