Makita CB100D Betriebsanleitung Seite 9

1.
the manufacturer. A charger that is suitable for
when used with another battery pack.
2.
Use of any other battery
3.
from other metal objects, like paper clips,
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
4.
help. Liquid ejected from the battery may cause
irritation or burns.
5.
may exhibit unpredictable behaviour resulting in
6.
excessive temperature.
perature above 130 °C may cause explosion.
7. Follow all charging instructions and do not
tions. Charging improperly or at temperatures
1.
2.
3.
result in a risk of overheating, possible burns
and even an explosion.
4.
out with clear water and seek medical atten-
5.
(1)
ductive material.
(2)
tainer with other metal objects such as
nails, coins, etc.
(3)
or rain.
breakdown.
6.
exceed 50 °C (122 °F).
7.
8.
9.
-
10. The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation require-
ments.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
Tape or mask off open contacts and pack up the
-
battery in such a manner that it cannot move
around in the packaging.
11.
it from the tool and dispose of it in a safe
-
12.
sive heat, explosion, or leak of electrolyte.
-
13. If the tool is not used for a long period of time,
SAVE THESE INSTRUCTIONS.
-
CAUTION:
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
also void the Makita warranty for the Makita tool and
charger.
- Tips for maintaining maximum
1.
less tool power.
2.
service life.
3.
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
charging it.
4.
-
it for a long period (more than six months).
-
9 ENGLISH
Installing the batteries to
-
-
-