Werbung
For Users Outside North and South America
R&TTE Declaration
Intermec Technologies Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of
R&TTE Directive (1999/5/EC).
•
ETSI EN 300 328
•
ETSI EN 301 893
•
ETSI EN 301 489
•
EN 60950-1
This product is marked with this logo and uses radio frequency bands that are harmonized throughout the European
0981
Community and others as noted in the table below.
802.11 Radio Precaution Statement
Caution: 802.11a Wireless LAN 5.15 to 5.35 GHz is limited to indoor use only.
802.11a Radio Mode: The following table indicates the areas of intended use of the equipment and any known restrictions as defined in
ERC/REC 7003E 2009:03, Annex 3 Band B and C.
The transmitter module's output power is 17 mW EIRP. The products using this module are intended for business and industrial
environments. They should not be used in residential environments and by children.
Note: Dynamic Frequency Selection and Transmit Power Control are required in the 5250 to 5350 MHz and 5470 to 5725 MHz frequency
range.
EU Country of Intended Use
Austria
Belgium
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithiuania
Luxembourg
Malta
The Netherlands
Poland
Portugal
Slovakia
Slovenia
Spain
Sweden
United Kingdom
4
License
Yes
No
Required
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Restrictions
Details
X
5150 to 5350 MHz has limited
implementation.
5470 to 5725 MHz Relevant+ provisions for
the implementation of DFS mechanism
described in ETSI standard EN 301 893 V1.3.1
and subsequent versions.
5150 to 5350 MHz has limited
implementation.
X
For private use, a general authorization is
required if WAS/RLAN's are used outside
premises. For public use, a general
authorization is required.
General authorization required for network
and service supply.
Werbung
