Sony PDBK-103 Installationsanleitung Seite 22

22 Installation
6
Connect the four cables to the corresponding connectors on this
board.
Check the identifying colors of the cables and connect as follows.
Identifying colors
Green
Blue
Red
White
7
Carry out steps 1 to 4 below to install this board with the cables
in option slot 2. (Connect the connector of this board to the
CN2203 connector on the motherboard.)
Connector
of this board
CN2203 connector
Destination connectors
Y/G (GREEN)
Pb/B (BLUE)
Pr/R (RED)
SYNC (WHITE)