Components Of The Pdbk-103 - Sony PDBK-103 Installationsanleitung

HOME page
Setting item
F1: V INPUT (video input)

Components of the PDBK-103

The PDBK-103 consists of the following items.
Removing the Connector Covers
When this board is shipped from the factory, connector covers are
attached to the connectors on the HD INPUT connector panel.
When you install this board in the PDW-F70/F75
Install the board after removing the connector covers.
When you install this board in the PDW-70MD/75MD
Install the board, and then remove the connector covers from the
connectors that you need to use.
Description
Selects the video input signal.
HDSDI: HDSDI signal
YPbPr: YPbPr analog HD signal
RGB: RGB analog HD signal
SG: Test signal from the internal signal generator
ADC-50 board
Y /
G
P r
/ R
HD INPUT connector panel
(with connector covers)
Cable × 4
Screw A (+ B 3 × 5) × 4
Screw B (+ PSW 3 × 8) × 4
Overview 17