Herunterladen Inhalt Inhalt Diese Seite drucken

Installation - Hydor CO2 TURBO DIFFUSER Bedienungsanleitung

Co2 zerstäuber für aquarien
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
GB
Dear Customer,
we thank You for choosing this quality pro-
duct. Please read the following instructions very
carefully for best understanding of the characte-
ristics of this new, innovative product.
DESCRIPTION
(fi g. 1)
A CO
Diffuser cover
2
B Filter sponge
C Pre-fi lter
D Rotor
E Intake tube
Caution: before placing your hands inside the
tank, disconnect all electrical appliances from
the mains.Check the voltage to verify that the
one reported on the air pump label corresponds
to your electrical supply mains.

INSTALLATION

Caution: verify that all components of the pro-
duct are undamaged before putting it into fun-
ction. Do not operate the air pump completely
out of water, dry running will cause structural
damage to the rotor. Please install the product
following these simple instructions.
1. Unwind the electrical cord and the air
intake tube.
2. Connect the intake tube to the diffuser
chamber -Fig. 2-.
3. Join together the electric cord and the air
intake tube by using the connectors/suc-
tion cups supplied as shown in -Fig. 3/3a-.
4. Place the TURBO DIFFUSER in the aqua-
arium gravel, in a stable position
using the supplied base and suction
cups -Fig. 4-.
5. Use the aquarium gravel to hide the
diffuser leaving out only the cover (for
best diffusion TURBO DIFFUSER should be
position
where
water circulation)
6. Cut the plastic tube as personal need and
connect diffuser to own CO
7. Connect the electrical cord to the electri-
cal supply.
ARIO TURBO DIFFUSER MAINTAINANCE
Attention: regular cleaning and maintenance
of TURBO DIFFUSER will guarantee better
performance and durability. Before any kind
of intervention always disconnect the diffuser
and any other submerged equipment from the
electrical supply.
• Detach diffusion cover (A);
• Detach the fi lter sponge B and rinse it with
lukewarm water without using detergents;
• Detach the pre-fi lter/chamber (C and F) from
the body G and remove the rotor D;
• Clean the rotor and it's location from lime
F CO
pump chamber
2
G CO
pump body
2
H Positioning base
I Suction cups
there
is
some
supply system.
2
scale with a soft brush (non metallic);
• Rinse thoroughly with lukewarm water and
re-assemble components inverting the or-
der, paying particular attention that the
rotor is positioned properly in it's location;
• Do not use solvents or detergent of any sort.
• Use original spare parts.
SAFETY STANDARDS
• The diffusor intended for indoor use
only and it is designed to operate in fl uids
with a temperature of max. 35° C.
• Verify that the voltage of the mains corre-
sponds to the voltage shown on the unit's
label.
• Before connecting the diffusor to the mains
supply be sure that the cord is not damaged.
• The cord of the diffuser cannot be replaced
or repaired; in case of damage the entire
unit must be replaced.
• Make sure the house/location is protected
by a circuit breaker with intervention
power lower than 30 mA.
TROUBLESHOOTING...
If TURBO DIFFUSER does not work check if:
• It is connected properly to the electric
supply.
• The diffuser is damaged.
• The diffuser is positioned correctly.
• The CO
control is not completely closed or
2
blocked.
• TURBO DIFFUSER is positioned correctly
and that no gravel can accidentally
come in contact with the pre-fi lter.
If TURBO DIFFUSER is noisy, check that:
• It is positioned far from lateral surfaces (ex.
aquarium side) that might cause disturban-
ce and/or vibrations.
• The pre-fi lter is not blocked.
• The intake tube is not partially blocked.
• The rotor is positioned correctly.
EUROPEAN UNION
DISPOSAL INFORMATION
This symbol means that according to local
laws and regulations your product should
be disposed of separately from household
waste. When this product reaches its end of
life, take it to a collection point designated by
local authorities. Some collection points ac-
cept products for free. The separate collection
and recycling of your product at the time of
disposal will help conserve natural resources
and ensure that it is recycled in a manner that
protects human health and the environment.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis