newfeel DISTA 500 Bedienungsanleitung Seite 5

2/ Setting the pedometer
- When setting the device, if no button is pressed for 30 seconds, the pedometer
automatically exits the setting mode.
- Once a type of unit is selected, it is applied to all modes.
For example : steps in cm = weight in kg = distance in km.
steps in inches = weight in lb = distance in miles.
2.1 Setting the time
hour beep + button
2
The day of the week is calculated automatically by setting the date.
* Activating the back-lighting
2.2 Setting the pedometer
To use the distance calculator function, you rst need to set your stride length. The more accurate the
stride length, the more reliable the measurement of distance covered will be.
To do this:
Count the number of paces it takes you to cover a distance of 10 metres. Repeat the exercise several
times to make sure this number is correct.
For example: You need 14 paces to cover 10 metres.
10 / 14 = 0.71
Your stride is therefore 71cm long.
The device has an automatic walking/running mode. It automatically detects your stride type and
adjusts its calculations accordingly. It is therefore necessary to set a stride length for walking
a stride length for running
Back-lighting*
will light up the screen whenever you press a button.
. To calculate calories burned, you need to enter your weight.
and
3