Olimpia splendid Sherpa OS-CEBSH24EI Handbuch Für Installation, Gebrauch Und Wartung Seite 50

3
To set the parameters see the table below that summarises the parameters.
Example:
Parameter
HOUR SETTING
MINUTE SETTING
TIMER ACTIVATION/
DEACTIVATION
TIME
NIGHT-TIME MODE
ACTIVATION/
DEACTIVATION
deactivated
activated
NIGHT-TIME MODE
SWITCH-ON TIME
NIGHT-TIME MODE
SHUTDOWN TIME
Inlet water temperature
Outlet water
temperature
Domestic water tank
sensor temperature
Outside air sensor
temperature
Compressor operating
hours
COOLING SET-POINT
1
COOLING SET-POINT
HEATING SET-POINT
1
50
, to view USr on the display
to increase or reduce the parameter value displayed
, to exit and view the parameter
to change parameter and proceed as above to change other parameters
simultaneously to quit the user menu
DISPLAY MENU
MNEMONIC
User
User
User
StA User
Sto User
ncL User
nSt User
nSP User
Temperature/
t1
Set
Temperature/
t2
Set
Temperature/
t3
Set
Temperature/
t4
Set
Temperature/
CHC
Set
Temperature/
Set
cS1
User
Temperature/
Set
cS2
User
Temperature/
Set
HS1
User
Range of Factory
setting
0-23 0
0-59 0
0-1 0
00.0 – 23.5 0.00
minutes
00.0 – 23.5 0.00
minutes
The yield and the maximum
noise level are reduced
0,1 0
00.0 – 23.5 0.00
minutes
00.0 – 23.5 0.00
minutes
Factory settings for radiant
- 25°C
- 20°C
Factory settings for radiant
- 25°C
- 20°C
Factory settings for radiant
- 55°C
- 60°C
COMMENTS