Collexia Fast & Curl System G6401 Bedienungsanleitung Seite 13

• Slightly tilt the product with respect
to the hair lock and rotate the
appliance by 360° in one direction or
the other, depending on the effect to
be created.
• For a more sustained curl, proceed very
slowly and, while sliding downwards,
add rotations that will help the hair lock
adhere better to the heated plates (2).
• Finally, define your hairstyle.
• Switch off the styler by sliding the O/I
switch (6) to O (off).
• Disconnect the power cable (7) from the socket and leave the
appliance cool down before putting it away.
The length of the hair to be styled and the thickness of the hair lock
determine the hair distribution along the heating plates (2) and the
final result.
Voluminous, classic, soft and wavy hairstyles are created depending
on how much the styler is tilted with respect to the hair lock
(horizontal, vertical, diagonal) and the movement made.
• Slowly slide the styler downwards,
keeping it tilted, so that the lock does
not overlap during the movement.
Note: Steam can develop during straightening; this is excess
360°
humidity in the hair that evaporates.
CLEANING
IMPORTANT! Turn the appliance off and unplug it
from the socket before cleaning!
• Upon switching the styler off, wait for the heating plates (2) to
cool down.
• Clean the surface of the heating plates (2) and the handle with a
soft, damp cloth.
• Do not place the appliance in water or other liquids!
• Before reusing the appliance, ensure that all parts that have been
cleaned with a damp cloth are completely dry!
• Do not use solvents or other aggressive or abrasive detergents.
This can damage the surface.
STORAGE
• Before putting the styler away, disconnect the plug of the power
cable (7) from the socket and wait for the appliance to cool down.
• Keep the appliance in a dry place protected from dust and away
from the reach of children.
• Do not wrap the power cable (7) around the appliance.
11