Advice On Use - Collexia Fast & Curl System G6401 Bedienungsanleitung

• Rinse thoroughly to remove any shampoo residue. A final cold-
water rinse will make your hair even shinier.
• Use a hairdryer to dry your hair. Finish blow drying using cold air
to keep your hair smooth and shiny. To this end, devices with cold
shot button are particularly useful.
Appliance adjustment and switch-on
Burn hazard! Prevent contact between the heating
plates (2) and the skin.
• Insert the plug (7) into a conforming socket with AC voltage, as
shown in the product identification plate.
• Slide the temperature switch (5) to select the required heating
level:
• 170°C for fine and sensitive hair (e.g., for light, bleached and
dyed hair)
• 190°C for normal hair, easy to style
• 210°C for thick or very thick hair
• Slide the O/I switch (6) to I (on) to switch on the appliance.
• The selected temperature LED (4) blinks while the appliance is
heating and remains steady once the operating temperature is
reached.
• The electronic adjustment keeps the set temperature constant
throughout the application.
• The appliance has an automatic safety function.
10
The product switches off automatically when it is not used for
60 minutes.
• To restart the appliance, slide the O/I switch (6) to O (off) and then
to I (on) again. The selected temperature LED (4) blinks.

ADVICE ON USE

• You can create full hairstyles or style only some locks, as you
wish.
• Comb your hair carefully.
• Divide your hair into locks starting from the back of your head.
• Take a small lock, approximately 2 cm thick.
• Take a lock of hair, not too wide or voluminous (about 2 cm),
between your fingers; more defined curls are obtained with
smaller locks of hair.
• Keep the styler horizontal and insert
the lock into the slot (3) through the
hair lock insertion system (1), taking
care to push it down to the bottom,
near the handle.
• Move the styler up the lock near the
roots.