Safety Precautions - Sulion Handair 72643 Bedienungsanleitung

Congratulations on your purchase
Congratulations on purchasing the latest energy-efficient ceiling fan technology. This fan uses DC current,
allowing for very high energy efficiency and high air circulation volume without added noise.
Energy efficiency: Your DC motor is the latest in fan design technology. It saves up to 70% of energy
compared to fans with traditional AC motors.
Silent operation: This fan's DC motor uses a stabilized current, which allows it to significantly reduce
operating noise.
Low-heating operation: This DC motor is powered efficiently, reducing its operating temperature to
under 50º C. This results in better cooling than a standard AC motor and increases its durability.
Comfort: This fan with a DC motor incorporates a six-speed remote control that exceeds the traditio-
nal number of speeds in AC motors, allowing for a greater variety of comfort levels.
Precaución
Follow these instructions carefully to enjoy maximum safety in the installa-
tion and operation of this equipment.
The minimum distance between the lamp and any illuminated objects must
be greater than 1m
The electrical installation of the ceiling fan must be carried out by an autho-
rized electrician in order to be covered by our warranty.
This device can be used by children aged 8 years and above and people
with reduced physical, sensory or mental abilities or lack of experience
or knowledge, if they have been given appropriate supervision or training
<8
regarding the use of the device and they understand the dangers of its use.
Children should not play with the device. The cleaning and maintenance of
the device should not be carried out by children without supervisi
The fan must be installed in such a way that the blades are more than 2.3m
min 0,3m
above the ground. Make sure that there is a space of at least 30cm between
the fan's blades and any wall or other obstacle that they could hit. It is
min 2,3m
important to note that the greater the distance, the more efficient the air
flow produced will be.
Before contacting the technical service, it is recommended to read the
¿?
FAQ
troubleshooting guide included in this manual.

Safety precautions

The information contained in the following pages has been prepared to ensure your maximum
enjoyment of your fan:
1. The installation must be carried out by qualified personnel to do electrical installations in
accordance with the regulations in force in the country of installation.
2. Any action performed for the electrical connection of the device, such as its cleaning, must
be carried out after ensuring that the general power supply is disconnected, by removing
the corresponding fuse or disarming the protective switch in order to ensure total isolation
of the power supply.
3. The fan must be installed at a location on the ceiling sch that the blades are at least 2.3
m above the floor and 300 mm from any object or wall. The mounting bracket must be
attached to a ceiling structure that is capable of supporting a minimum of 30 kg using the
two screws provided. At least 30 mm of the length of the screws must be screwed into
the bracket. When deciding where to mount the fan, be sure that there is at least 30 cm of
space between the fan and any wall or other obstruction that the fan blades could collide
with. The greater this distance, the more effective the air flow produced.After the fan is
mounted, be sure that the blades are no less than 2.3 m above the ground
4. The ground wire of the fan must be connected to the earth network of the installation, to
avoid any derivation that may put people in danger.
5. Do not connect the fan's power supply to any dimmers, potentiometers, or light switches,
as it will cause the fan to malfunction and/or will damage the motor. For the electrical
connection it is necessary to incorporate a switch disconnector in accordance with the
installation regulations, which ensures an omnipolar cut, directly connected to the power
.
EN
on.
11