Technical Data; Troubleshooting - Kasanova TYC000004NOC Bedienungsanleitung

SLOW JUICER
disassemble hopper to clean material ,then assemble hopper again to go
on work.( very important: before disassemble hopper ,must unplug from
power socket).
10. When finished or leave juicer for a while ,switch off the juicer and unplug
from power socket.
HOW TO CLEAN JUICER
1. Switch off juicer and unplug from power socket before cleaning
2. As per step of assembling to be reverse method to disassemble all parts
of juicer one by one
3. Use brush to clean all parts under water tap
4. Use damp cloth to wipe base ,make sure do not let any liquid go into the
base

TECHNICAL DATA

Input voltage: AC220-240V
Frequency :50/60Hz
Power:150watts
Speed:DC motor 60RPM
Max operation time: less than 20min
TROUBLE SHOOTING
Before you call for service ,review the trouble shooting firstly
PROBLEM
No power to work
Motor is stopped during
working
POSSIBLE CAUSE
Juicer is not plugged in
correctly
Incorrect to assemble hopper
Bowl is overfill with material
Hard material inside or much
fiber inside that cause juicer
be stuck
WHAT TO DO
Check the juicer to plug in
tightly
Re-assemble hopper cor-
rectly
Press reverse button to un-
clog material .if not working
,then disassemble hopper
to clean material and then as-
semble hopper again to try .if
juicer still is not working ,stop
juicer to call service agent
11