Herunterladen Inhalt Inhalt Diese Seite drucken

Radio; Other Settings; Search For A Station; Direct Access Tuning - Kenwood KMM-BT356 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für KMM-BT356:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Radio

• "ST" indicator lights up when receiving an FM stereo broadcast with
sufficient signal strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.

Search for a station

1
Press B SRC repeatedly to select RADIO.
2
Press BAND repeatedly (or press #FM+/ * AM– on the remote control)
to select FM1/FM2/FM3/MW/LW.
3
Press S / T (or press S / T (+) on the remote control) to
search for a station.
You can store up to 18 stations for FM and 6 stations for MW/LW.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).

Direct Access Tuning

(for
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a station frequency.
3
Press ENT IW to search for a station.
• To cancel, press
or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
8
ENGLISH
using the remote control)

Other settings

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
[TUNER SETTING]
Selects the searching method for S / T buttons when pressed.
[SEEK MODE]
[AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset
station. ; [MANUAL]: Manually search for a station.
[LOCAL SEEK]
[ON]: Searches only stations with good reception. ; [OFF]: Cancels.
• Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
[AUTO MEMORY]
[YES]: Automatically starts memorizing 6 stations with good reception. ;
[NO]: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)
[MONO SET]
[ON]: Improves the FM reception, but the stereo effect will be lost. ;
[OFF]: Cancels.
[NEWS SET]
[ON]: The unit will temporarily switch to News Programme if available. ;
[OFF]: Cancels.
[REGIONAL]
[ON]: Switches to another station only in the specific region using the "AF"
control. ; [OFF]: Cancels.
[AF SET]
[ON]: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ; [OFF]: Cancels.
.
Default: [XX]

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Kmm-bt306Kmm-bt206

Inhaltsverzeichnis