Machine Description - Berkel BS+2400 F Bedienungs- Und Wartungsanleitungen

1.3 Guarantee
The user is not authorized to tamper with the machine for any reason.
If a fault occurs, contact the manufacturer.
Any attempts at dismantling or in general tampering with any component of the
machine by the user or non-authorized personnel will render the guarantee null
and void and exempt the manufacturer form all responsibility for any damage
either to people or things deriving from the above.
The manufacturer is also exempt from all responsibility in the following cases:
•
incorrect installation;
•
improper use of the machine by inadequately rained personnel;
•
failure to comply with the regulations in force in the country in which the machine
is used;
•
lack of or insufficient maintenance;
•
use of non-original spare parts and spare parts not specifically designed for the
model;
•
total or partial failure to follow the instructions.
1.4

Machine description

The saw you have purchased is a safe reliable machine and easy to use.
Pulleys are made of aluminium.
Machine body and accessories are made of stainless steel AISI 304.
It is provided with mechanical guards (casings, doors, etc...) and electrical safety
devices (micro switch, emergency stop button etc.) in order to reduce operator
risks to a minimum.
The pulley angle can be adjusted both horizontally and vertically in order to ensure
maximum blade contact.
The motor is self-cooling, water-protected, self-braking and operates intermittently.
The push-button panel is located in an easily accessible position with the controls
powered at 24 volts.
The machine has been designed to facilitate cleaning operations, in particular due
to the following technical features:
•
easy removal of the blade and upper pulley without using tools;
•
once the pulley has been removed, the machine has a smooth surface thus
facilitating cleaning operations and allowing the dirt on the blade to deposit
directly in the tray;
•
all the electrical parts are protected to IP 56 (minimum).
8