Use; Switching Off; Malfunctions - FireWare FireSpot Gebrauchsanweisung

User Manual
EN
FireWare FireSpot
4.

Use

To use the FireWare FireSpot, simply place the device in the desired
location and insert the power plug into a power socket.
The position indicator (1) on the side can be helpful to angle the FireWare
FireSpot at an exact angle or to easily position two FireWare FireSpots at
the same angle.
The FireWare FireSpot is equipped with special lenses, making for a
broad red glow with an orange core. It can be used for creating both
horizontal and vertical flame effects.
The FireWare Firespot is perfectly equipped to colour in practice smoke
for any training exercise. Aim the FireWare FireSpot at a cloud of smoke
to make it appear as if there is a fire.
Visit www.FireWare.nl to view the available range of FireWare smoke
machines.
5.

Switching off

After using the FireWare FireSpot, disconnect the power plug from the power socket by pulling the
power plug from the socket. DO NOT pull on the wire. Let the FireWare FireSpot cool down before
storing.
6.

Malfunctions

Problem
One of the lenses is not
turning on upon connect-
ing to a power outlet.
None of the lenses are
turning on upon connect-
ing to a power outlet.
Other
www.FireWare.nl
Cause
A lense is malfunctioning or
broken.
The power plug has not been
inserted into the power outlet
correctly.
The FireWare FireSpot is mal-
functioning or broken.
Solution
Contact FireWare for a replace-
ment lense and repairs.
Correctly connect the power plug
into the power outlet.
Contact FireWare for repairs.
Contact FireWare.
FireWare FireSpot
1
9