Introduction; Safety Measures And Warnings - FireWare FireSpot Gebrauchsanweisung

User Manual
EN
FireWare FireSpot
1.

Introduction

Congratulations on the purchase of your FireWare FireSpot!
The FireWare FireSpot is the ideal tool to colour in smoke and safely simulate a fire.
!
2. Safety measures & warnings
When using this appliance closely follow the instructions and guidelines, as described in this
manual. Never change the order of the acts to be performed. In case anything concerning
the use is not clear please contact FireWare.
Use this appliance only for what it is designed for.
The manufacturer does not accept any responsibility for damage caused by not
(strictly) observing the safety measures and instructions in this manual or for
carelessness during the use of the product listed in this document and possible
matching accessories.
Make sure all connectors are connected properly. Never use this object if it is damaged. In
case parts are damaged FireWare staff needs to replace them.
This product has an IP67 qualification. Do NOT use this appliance underwater.
Do NOT use this appliance in the proximity of real fire.
Do NOT stare into the LED.
In the event service or repair is required this product can ONLY be opened by a qualified
FireWare technician.
Only use a source of AC power that complies to local electrical codes.
Disconnect the power supply before maintaining or cleaning the appliance.
Do NOT install the appliance in a flammable or explosive area.
WARNING: Some surfaces may be hot.
Do NOT use this appliance in spaces with ambient temperature higher than 40 °C or lower
than -30 °C
www.FireWare.nl
Prior to using it you should read this user manual thoroughly,
in order for you to be fully informed about the use, working and
the characteristics of the FireWare FireSpot.
FireWare FireSpot
7