Blaupunkt BREMEN SQR 46 DAB Bedienungsanleitung Seite 59

HANDSFREE VOL
Adjusting the minimum volume for telephone calls. Settings: 1 – 50.
Press the rotary control to change the setting.
Turn the rotaty control to set the volume. BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Press the rotary control to con rm the setting.
Note:
During the phone call, you can change the volume directly by
means of the volume control.
BEEP (button beep)
Switching the con mation beep on or o Settings: ON, OFF.
Note:
When storing radio stations, a con rmation beep sounds even if the
OFF setting is selected.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to con rm the setting.
Making settings in the "CLOCK" menu
PERM CLOCK
Switching the permanent display on or o Settings: ON, OFF.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to con rm the setting.
If the permanent display of the time is switched on, the time is shown on
the display. The display of the respective audio source is shown only after
pressing a button. Approximately 15 seconds after the button is pressed
last, the time is displayed again.
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
28
BR460 BR460
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to con rm the setting.
SET
Setting the time.
Press the rotary control to change the setting.
Turn the rotary control clockwise to set the hours.
Turn the rotary control counter-clockwise to set the minutes.
Press the rotary control to con rm the time setting.
Note:
When you set the time in 12-hour mode (HOUR MODE 12), an
"AM" is displayed before the time for the time before noon or a "PM"
for the time after noon.
RDS CLOCK (automatic time setting) (only for reception area EUROPE)
Switching automatic clock setting with clock data transmitted via RDS on
or o . Settings: ON, OFF.
Note:
The time set with the clock data may not be correct, even if an RDS
station is being received.
Press the rotary control to change the setting.
.
Turn the rotary control to change between the settings.
Press the rotary control to con rm the setting.
Making settings in the "VARIOUS" menu
DEMO MODE
Switching the DEMO mode on or o . Settings: ON, OFF.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to con rm the setting.
In demo mode, the features of the radio are shown as scrolling text on the
display.
AUTORADIO
Bedienungsanleitung
Operating instructions
Mode d' emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
User settings
28
59
22.05.19 17:00 22.05.19 17:00