Klarstein Hudson Bedienungsanleitung Seite 27

Maintenance
• When you move the unit, hold it by the sides or floor. Do not hold it by the edges
of the top.
• The unit should be serviced by an authorized technician and only original spare
parts should be used. Do not attempt to repair the unit yourself. Repairs by
inexperienced persons may result in injury or serious malfunction.
• If the unit is not to be used for an extended period of time, disconnect it from the
power supply. Remove all food and clean the appliance. Leave the door open to
prevent unpleasant odours.
Replace the lamp
Note: The lamp specification is shown on the rating label.
Proceed as follows to replace the lamp:
1. Set the temperature regulation knob to „0" to switch off the unit.
2. Unplug the appliance to make sure the appliance is disconnected from main power
supply.
3. Remove the screw of the lamp cover.
4. Pull the lamp cover out.
5. Unscrew the lamp.
6. When inserting the new lamp, proceed in reverse order. Then replace the lamp
cover and screw it in place.
7. Plug in the appliance and regulate the temperature regulation knob to the desired
position.
EN
27