CAUTION – PROPERTY DAMAGE!
Use only the ironing temperatures stated in the care ins-
►
tructions as suitable for the material . Otherwise, you could
damage the textiles . If you do not know the correct care
instructions, start with the lowest temperature setting .
If the clothing care instructions forbid ironing, (
►
the clothing item may not be ironed . Ignoring this warning
could lead to permanent damage to the clothing item .
The water tank should be filled only with tap water or distilled
►
water . Otherwise you will damage the steam iron .
Do not clean the steam iron with solvents, alcohol or abrasive
►
cleaning agents . These could damage it .
Before first use
1) Remove the steam iron from the packaging .
2) Remove all stickers and protective films from the steam iron and from the sole
of the iron
►
3) Fill the water tank with water (See the chapter "Filling the water tank") .
4) Insert the plug into a mains power socket supplying an electrical current as
detailed on the rating plate .
5) Move the temperature control
6) Heat the steam iron up for several minutes at the highest setting .
7) Activate the steam blast button
out of the sole of the iron
8) Then iron over a piece of scrap fabric to remove any production residues that
may remain on the sole of the iron
DB 1800 A1
.
0
WARNING – RISK OF SUFFOCATION!
Plastic bags can be dangerous . To avoid the risks of asphyxiation, keep
plastic bags out of the reach of babies and toddlers .
to the "MAX" position .
6
a couple of times so that steam comes
4
.
0
.
0
symbol),
GB │ IE
│
21
■