Installation Conditions - Mitsubishi Electric Jet Towel JT-SB216JSH-W-NE Bedienungsanleitung

Installation conditions

■ Required space for installation
Be sure to secure at least the distances
Cautions
listed in the right-hand table from walls,
flammable (combustible) materials and
so on.
Ensure a distance of at least 130mm from
the floor. Failure to do so may result in dirt
or water entering the appliance, causing
damage.
Ensure there is at least 150mm on
both sides of the appliance to allow for
maintenance.
■ Suitable walls
Flat walls with no unevenness.
Walls that can support the weight of the appliance.
Reinforce any walls made with materials other than
concrete.
When installing on a concrete wall, use commercially
available metal screw anchors.
■ Making the appliance easier to use
Refer to the "Installation position guide".
Leave 200mm recommended clearance on the left to
make maintenance easier.
Avoid locations where people or doors might bump
into the appliance.
Left
Below
Installation position guide
− 5 −
Wall
Right
Location Clearance
Top
Left
Right
Front
Below
Unit (mm)
For men: 925mm
For women: 905mm
Open
150mm
150mm
Open
130mm