Mounting Position - Canon RS-CL11 Zusammenbau- Und Installationsanleitung

Mounting Position

This manual describes how to assemble and install the ceiling attachment using WUX4000.
Install the projector straight in front of the screen. You can adjust the screen position and keystone using the
lens shift feature. For details, refer to the user's manual provided with the projector.
● Before mounting the Ceiling Attachment, be sure to check the strength of the
Caution
● To prevent falling caused by earthquake or vibration, take anti-fall measures using
RS-CL11
Projection Distance
H2(Height)
H1(Height)
Distance from ceiling to lens center (l)
RS-CL11 When RS-CL08 is used
21 cm/0.7' 56 cm/1.8' to 76 cm/2.5'
For more detailed information on the screen sizes (H1, H2) and the
projection distance, please refer to the user's manual provided with
the projector.
Ceiling-mount bracket
100 mm 100 mm
80 mm 80 mm
ceiling. The ceiling should be strong enough to support the projector and Ceiling
Attachment (and optional extension pipe). If the ceiling is not strong enough, be
sure to reinforce it. The projector may fall and you may get injured.
tension wires or the like for installation. The projector may fall and you may get
injured.
l
194 mm
Side view
194 mm
80 mm
92 mm
Top view
When RS-CL09 is used
76 cm/2.5' to 116 cm/3.8'
209 mm
236 mm
430 mm
236 mm
183 mm
167 mm
167 mm
91 mm
92 mm
380 mm
Front view
190 mm
190 mm
3