Mounting Position - Canon RS-CL17 Zusammenbau- Und Installationsanleitung

Mounting Position

Install the projector straight in front of the screen. You can adjust the screen position using the lens shift feature.
Warning
Caution
Installation Dimensions
Projection Distance
Height
Distance from ceiling to lens center (l)
RS-CL17+RS-CL15
26.5 cm/0.9'
For more detailed information on the screen sizes and the projection distance, please
refer to the user's manual provided with the projector.
Ceiling-mount bracket
100 mm 100 mm
/3.9" /3.9"
80 mm 80 mm
/3.1" /3.1"
4
● Before mounting the Ceiling Attachment, be sure to check the strength of the
ceiling. The ceiling should be strong enough to support the projector and Ceiling
Attachment (and optional extension pipe). If the ceiling is not strong enough, be
sure to reinforce it. The projector may fall and it may result in severe injury.
● Make sure to perform the installation operation by at least two persons. Please be
careful not to drop any object and pinch a finger during the installation operation.
● To prevent falling caused by earthquake or vibration, take anti-fall measures using
tension wires or the like for installation. The projector may fall and it may result in
severe injury.
● At least 50 cm (1.6') around the intake and 50 cm (1.6') around the vent should be
clear. Otherwise, it may damage the projector due to bad exhaust ventilation.
l
342 mm/12.8"
624 mm/24.6"
323 mm/12.7"
263 mm/10.4"
133 mm/5.2"
When RS-CL08 is used
61.5 cm/2.0' to 81.5 cm/2.7'
91 mm/3.6"
282 mm/11.1"
Side view
282 mm/11.1"
227 mm/8.9"
230 mm/
9.1"
230 mm/
9.1"
Top view
When RS-CL09 is used
81.5 cm/2.7' to 121.5 cm/4.0'
l
133 mm/5.2"
559 mm/22.0"
Front view
277.5 mm/10.9"
277.5 mm/10.9"