Canon RS-CL11 Zusammenbau- Und Installationsanleitung Seite 18

7
Hook the Base bracket to the Joint
fitting and secure it temporarily
Hook the Base bracket on the protrusion (A)
of the Joint fitting, and secure it temporarily
using the four supplied M5 screws (B).
● Pull out the cables as shown.
● Be sure to secure screws (B) tightly after making
the adjustment discussed in "Adjusting the
Projection Angle " (page 10).
8
Connect cables
Connect cables to the projector.
After completion of installation, adjust
the projection angle (page 10).
6
B
A
B