Maintenance - ARDES AR4P04T Bedienungsanleitung

To turn the appliance on, insert the plug into the power socket and set the switch on
the back of the appliance to "I".
Press the ON/OFF button on the control panel and the HEAT button to select full-
power or half-power operation.
To activate swing, press the SWING button.
To activate the program function, press the TIMER button; each press increases
the time by 1 hour up to a maximum of 8 hours. When the set time has elapsed, the
appliance will turn off automatically.
The remote control can be used to activate the same
functions found on the control panel of the appliance. Use
HEAT to select the power, and the +/- buttons to set the
temperature at which the appliance turns off, starting up
again automatically when the temperature falls below the
set value.
Use TIMER to set the operating time after which the
appliance will turn off automatically.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
This appliance does not require any special maintenance.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from entering into
the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Battery Replacement.
In order to remove the cover of the battery seat, replace the battery with another
one featuring the same specifications, and replace the cap correctly.
If you do not intend to use the appliance for an extended period of time, remove
the batteries. If the batteries are leaking, be careful not to touch the acid which has
leaked out.
If you come into contact with the acid, wash your hands thoroughly.
Be careful that the acid does not come into contact with the eyes and that it is not
ingested.
Remove the batteries from the appliance before its disposal.
The batteries must be disposed of in the appropriate containers.
6
INSTRUcTIONS fOR USE

MAINTENANcE