General Guidelines - HQ Power NUROLED 1000 Bedienungsanleitung

3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm)
in front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it.

Do not modify the device for safety reasons. The warranty does not cover damage caused by user
modifications to the device.

Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.

Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, crash, etc. Using the device in an unauthorized way will void the warranty.

The warranty does not cover damage caused by disregard of certain guidelines in this manual and
the dealer will not accept responsibility for any ensuing defects or problems.

Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or
indirect) – of any nature (financial, physical...) arising from the possession, use or failure of this
product.

Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.

Keep this manual for future reference.
4. Features
The NUROLED 1000 is a compact, powerful strobe fixture featuring 132 high-powered SMD 5050 LEDs.

very high power output strobe effect, very low power consumption

indoor use, for all kind of applications

stand-alone, master/slave or DMX-controlled

DMX-controlled via 2 channels (intensity, duration)

power and power linking cable included
5. Overview
Refer to the illustrations on page 2 of this manual.
1 LEDs
2
mounting bracket
3
adjustment knob
4 power input
6. Mounting
Safety

Before mounting the product, read and follow the safety recommendations indicated in the Safety
Instructions.
Rigging

Overhead mounting requires extensive experience: calculating workload limits, determining the
installation material to be used... Have the material and the device itself checked regularly. Do not
attempt to install the device yourself if you lack these qualifications as improper installation may
result in injuries.

The carrying construction must be able to support 10 times the weight of the device for 1 hour
without deforming.

Always secure the installation with a secondary attachment such as a safety cable (e.g. VDLSC7N or
VDLSC8N). The secondary attachment shall be designed and mounted in such a way that no part of
V. 01 – 27/04/2015
VDPL1000STN
5 DMX input
6
DMX output
7
microphone
8 LCD display with control panel
4 ©Velleman nv