Switching Off - HAIRCUT TH32 Benutzerhandbuch

Figure 9: Lug (B) on the blades (A).

4.6 Switching off

Switch the clippers off by pressing the button (Figure 1, D). The indicator lights
showing the battery autonomy level (Figure 1, G and/or H) go out after about 2
seconds.
5 Servicing
Figure 10: Cleaning the cutters
4. Use the cleaning brush (D) to remove hair from the gaps between the fixed
cutters (C) and the mobile cutters (A).
Never remove the cutters or their springs from the holder.
5. Apply 1 or 2 drops of lubricating oil on each of the 5 cutter lubrication points
(Figure 8).
6. Put the blades back on the clippers (Figure 9).
Reinsert the blades, taking care to fit
the lug (B) in its slot first.
1. Detach the blades by pressing
on the spot shown by the arrow
(Figure 7) with your thumb.
2. Use the cleaning brush supplied
to clean the blades.
3. Push the plastic holder (B,
opposite) back with your thumb
to separate the fixed cutters (C)
and the mobile cutters (A) by
about 2 mm.
28