Team Kalorik TKG RAC 1016 Gebrauchsanleitung Seite 3

Fax +32 2 359 95 50

Never move the appliance by pulling the cord. Make sure the cord
❑
cannot get caught in any way. Do not wind the cord around the
appliance and do not bend it.
Stand the appliance on a table or flat surface.
❑
Make sure the appliance has cooled down before cleaning and
❑
storing it. Attention: the stone slab keeps the warmth for a
long period.
Make sure the cord never comes into contact with the hot parts of
❑
the appliance.
The temperature of the accessible surfaces may be very high
❑
when the appliance is in use. Do not touch these surfaces but use
the handles.
Make sure the appliance never comes into contact with
❑
inflammable materials, such as curtains, cloth, etc. when it is in
use, as a fire might occur. It is advised to place a heat resistant
coating between your table and the appliance (this way you don't
get burns on your table or table cloth).
Make sure not to scratch the special coating of the pans as you
❑
might get pieces of this coating in the food. Use a classical
wooden spatula or a heat-resistant plastic one.
Unplug the appliance when not in use.
❑
Only cook consumable food.
❑
It is essential to keep the appliance clean as it comes into contact
❑
with food.
Never place this appliance near to a wall. Always provide proper
❑
ventilation all around the appliance when using it.
Your appliance must never be switched on through an external
❑
timer or any kind of separate remote control system.
Please note: Should the symbol
❑
surface, you need to be careful when handling the product. This
symbol means: CAUTION, this surface may get very hot during
use.
The symbol
temperature, however the other metallic or non-metallic surfaces
can also become very hot during use and it is therefore advisable
to always handle them with care and if possible with the help of
isothermal gloves or other thermal protection. In case of doubt
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
is always put on the surface with the highest

Back cover page (last page)
Assembly page 3/53
be indicated on a certain