Behringer C210 Bedienungsanleitung Seite 13

(EN)
Step 2: Controls
(1)
SD/MMC jack allows you to play back digital audio files
stored on SD (Secure Digital) or MMC (MultiMedia Card)
flash memory cards.
(2)
USB input allows you to play back audio files stored on a
USB stick.
(3)
LCD DISPLAY shows the current DSP and
playback settings.
(4)
PLAYBACK SECTION for USB and SD/MMC offers the
following playback controls:
A B C D E F
A. PLAY/PAUSE: Press to play, pause or search.
B. MODE: Press to switch between USB, SD,
and Bluetooth.
C. REPEAT: Press to select between One, Random, Folder
or All repeat modes.
D. BACK: Press once to move to the previous song.
Press and hold to decrease the digital volume.
E. FORWARD: Press once to move to the next song. Press
and hold to increase the digital volume.
F. DSP: Press to switch between digital equalizer presets
for Pop, Rock, Jazz, Classic, Country or Music.
(5)
LEVEL rotary encoder controls the final DSP volume,
as well as signal levels for USB, SD, and Bluetooth. Press
for bass, treble, crossover or digital equalizer adjustment.
Press and hold for mute.
(6)
LINE/INST LEVEL controls the input level for the
LINE/INST combo jack.
(7)
MASTER level control adjusts the final speaker volume.
(8)
PWR LED lights up when the audio system is connected to
power and switched on.
(9)
CLIP LED lights up to indicate the internal limiter is
responding to signal peaks.
(10)
TREBLE knob adjusts the level of treble frequencies for
the speaker unit.
(11)
BASS knob adjusts the level of bass frequencies for the
speaker unit.
(12)
OUTPUT jack sends out a copy of the LINE/INST signal over
balanced cables with XLR connectors.
(13)
LINE/INST combo jacks accept input signals using XLR,
balanced ¼" TRS or unbalanced ¼" TS connectors.
(14)
IN 2 jack accepts microphone signals over balanced cables
with ¼" TRS connectors.
(15)
IN 1 jack accepts microphone signals over balanced cables
with ¼" TRS connectors.
(16)
LEVEL 1 knob controls the input level for the IN 1 jack,
as well as the wireless Bluetooth mic.
(17)
LEVEL 2 knob controls the input level for the IN 2 jack.
(18)
POWER switch turns the unit on and off.
Before turning on the audio system, all level
controls must be set to minimum. Once the
system is turned on, slowly increase input levels
to help prevent damage to the speaker
and amplifier.
(19)
AC INPUT jack accepts the included IEC power cable.
(20)
LED POWER light turns the unit on and off.
Remote Control
(1)
POWER button turns the unit on and off.
(2)
MODE button switches the DSP between USB, SD,
and Bluetooth.
(3)
U/SD button switches between USB and SD/MMC for
playback of audio files.
(4)
REPEAT button activates the repeat playback mode. Press to
choose between One, Random, Folder or All repeat modes.
(5)
BACK/FORWARD/VOLUME ring controls DSP volume and
back/forward between songs.
(6)
PLAY/PAUSE button starts and stops playback of
audio files.
(7)
DSP button switches between digital equalizer presets for
Pop, Rock, Jazz, Classic, Country or Music.
(8)
MUTE button mutes the sound.
(9)
NUMERIC KEYPAD allows you to enter values for
various functions.
NOTE: The master POWER switch is located on the back of the unit
and must be switched on or off manually. The remote control does
not control the master POWER switch.
CAUTION: Do not expose the remote control's batteries to
excessive heat, such as sunshine, fire, or similar heat sources.
Quick Start Guide 13