Tascam DR-22WL Bedienungsanleitung Seite 3

Setting the mark skip mode
Multiple types of marks can be added to files (
, and ). With this function, you can set
LEVEL TIME PEAK
what type of mark to use when moving between them.
/MENU/8 button to open the menu screen.
Press the
1.
Press the F1
button to open the
2.
Use the F2 and F3
buttons to select
3.
, and press the F4
SKIP MODE
The options will be shown.
MARK SKIP MODE
Use the F2 and F3 buttons to select the mark
4.
skip mode.
Options:
(default): Move between all marks
ALL
: Move only between marks added
MANUAL
manually
: Move only between marks added using the
LEVEL
automatic mark function
LEVEL
: Move only between marks added using the
TIME
automatic mark function
TIME
: Move only between marks added when a
PEAK
PEAK indicator lit
: Do not move between marks
OFF
Press the F4 button to confirm the setting.
5.
/MENU/8 button to return
When finished, press the
6.
to the Home Screen.
Setting the XRI information recording
function
,
MANUAL
When recording in the BWF file format, the unit can also record
XRI information (eXtended Recording Information), which
includes the input volume and other recording settings.
page.
TOOL
Press the
1.
MARK Press the F1
2.
button.
Use the F2
3.
, and press the F4
MODE
The
XRI MODE
Use the F2
4.
mation recording mode.
Options:
OFF
(default): Record XRI information
ON
ON+GPS
setting
Press the F4
5.
When finished, press the
6.
setting
to the Home Screen.
CAUTION
GPS information is acquired from the dedicated app
(TASCAM DR CONTROL). This information cannot be
acquired when using the unit without the app. Infor-
mation acquired is as follows.
"LATITUDE": Latitude data
"LONGITUDE": Longitude data
/MENU/8 button to open the menu screen.
button to open the page.
TOOL
and F3
buttons to select
XRI
button.
options will be shown.
and F3
buttons to set the XRI infor-
: XRI information not recorded
: Record XRI and GPS information
button to confirm the setting.
/MENU/8 button to return
DR-22WL
Viewing XRI information
You can check XRI and GPS information recorded in a
BWF-compliant WAV file on the screen.
XRI
Follow these procedures to open the
XRI
Use the . and / buttons or the browse screen to
1.
select the file with information that you want to view.
While the Home Screen is open when stopped, press the
2.
/MENU/8 button to open the menu screen.
Press the F1
button to open the
3.
Use the F2 and F3
buttons to select the
4.
parameter.
Press the F4 button to open the
5.
shows the following XRI information.
If no information has been recorded,
shown.
Press the F4 button to return to the
6.
page.
TASCAM DR-22WL
screen.
page.
INFO
XRI
screen that
XRI
is
No Data
menu
INFO
3