ReaR PaneL
the rear panel provides the following connectors:
PS/2 mouse/ keyboard
VGa port
uSB 2.0 ports
HdMi port
HaRdWaRe SetuP
installing Memory Modules
.
the memory module has only one notch on the center and will only fit in the
right orientation.
2.
insert the memory module vertically into the diMM slot. then push it in until
the golden finger on the memory module is deeply inserted in the diMM slot.
you can barely see the golden finger if the memory module is properly in-
serted in the diMM slot.
3.
the plastic clip at each side of the diMM slot will automatically close.
Lan
uSB 2.0 ports
uSB 2.0 ports
uSB 3.0 ports
Coaxial
S/PdiF-out
port
Line-in
Line-out
MiC
(optional)
optical
S/PdiF-out
port
MS-7698
RS-out
CS-out
SS-out
(optional)
3