Olsberg 41/605 Anleitung Seite 36

Fig.12 Slide the swirl combustion chamber back
2
Fig.14 1. Rotate swirl combustion chamber and
2. take it out towards the bottom
36
Fig.13 1. Lift the baffle plate out of the locking pin,
1
● Clean the swirl combustion chamber.
● Remove ash from the contact faces out of the stove.
● Reinsert the swirl combustion chamber and the baffle
plate in reverse order.
Attention: When inserting the baffle plate, make sure
1
A
3
2. slide it back and
3. take it out towards the bottom
to slide the bevelled edge at the front un-
der the lug in the combustion chamber (see
Detail A in Fig.13).
2