Olsberg 41/605 Anleitung Seite 30

● Important!
Before gluing in place cladding panel 5 (Fig.7):
Screw plaster frame left/right (12) to cladding panel (5)
from the rear using 2 countersunk screws M5x35 (20),
washers (21) and hexagon screws M5 (22).
Set up cladding panel (5) with the pre-assembled plas-
ter frame and glue it together with insulation board (2)
and cladding panel (3).
Screw cladding panel (5) to insulation board (2) using 2
chipboard screws Ø6x140 (17).
17
5
20
Fig.7
30
2
2
1
12 21 22
3
● Important!
Before gluing in place cladding panel 6 (Fig.7):
Screw plaster frame left/right (12) to cladding panel (6)
from the rear using 2 countersunk screws M5x35 (20),
washers (21) and hexagon screws M5 (22).
Install cladding panel (6) with the pre-assembled plas-
ter frame and glue it together with insulation board (1)
and cladding panel (4).
Screw cladding panel (6) to insulation board (1) using 2
chipboard screws Ø6x140 (17).
1
4
3
4 22 21 12
6 17
20